SANIFLOW DJ0010F

Free Shipping to lower 48 states

General Description

· Liquid soap dispenser, wall mounted.
· Push-button operated.
· Robust.
· Suitable for high traffic facilities.
· Model suitable for public use.
· It normally goes along with a warm air hand dryer.
Components & Materials

· Thermoplastic SAN container, 1/8” (3 mm) thick, fumé colour. It is mounted on the wall by means of 4 wood screws with their corresponding 3/16” (5 mm) wall plugs (the lower ones attach the dispenser, while the upper ones fix it to the wall) (screws and wall plugs are provided). It can be filled with commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents.

· White ABS top filling lid. To refill, the lid is opened using a standard saniflow ® key supplied.

· White ABS push-button.

· Anti-dripping and anti-corrosion valve. Design based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness.

· Stainless steel AISI 302 springs.

Operation

Press push-button manually to dispense a measured amount of liquid soap. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist.

Designer’s note: Do not use E4-rated antibacterial soaps (active ingredients PCMX or Triclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions in this unit. Soap valve is not designed to dispense these types of corrosive soaps.

Technical Characteristics

Liquid soap: All except for surgical soaps.

Installation height: 6” - 8” from shelf

Quantity dispensed per pulsation: 0.033 - 0.04 Oz

Capacity: 37.2 fl. Oz

Container: Thermoplastic SAN, fumé colour

Operable force: 26 N

Push-button: ABS

Montaje: Surface

Size: 4-1/4”W x 8”H x 4-1/4”D

Weight: 0.66 Lbs.

Specification

SpecificationWall mounted soap dispenser, robust with a body made of thermoplastic SAN container, 1/8” (3 mm) thick, fumé colour. It shall be mounted on the wall by means of 4 wood screws with their corresponding 3/16” (5 mm) wall plugs; the lower ones attach the dispenser, while the upper ones fix it to the wall. The push-button and top filling lid shall be made of white ABS, and to refill, the lid shall be opened using a standard saniflow ® key supplied. The dispenser shall include an anti-dripping and anti-corrosion valve, which is based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness. The dispenser shall be provided with stainless steel AISI 302 springs. The soap dispenser shall be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for E4-rated antibacterial soaps (active ingredients PCMX or Triclosan), iodine-based surgical soaps, or alcohol-based antiseptic solutions. Overall dimensions shall be 4-1/4”W x 8”H x 4-1/4”D.