BOBRICK B68616.99
Bobrick 2-Wall Tub/Shower Grab Bar, 24 x 36
| Satin-finish 18-gauge type 304 stainless steel tubing 1-1/2'' diameter. |
| Bar passes through flange and is heliarc welded to form single structural unit. |
| Cover snaps over mounting flange to conceal screws. |
| Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors. |
| Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia. |
| Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed. |
| Meets ADA Accessibility Guidelines in U.S.A. |
| All joints and supports are contour cut and welded. |
| Concealed anchors and fasteners available as an optional accessory. |
Specifications:
Stainless steel grab bar. Horizontal two-wall bar 15-7/8” x 30-7/8” (405 x 785 mm). Grab bar for 36” x 36” shower stall, 1-1/2" (38-mm) diameter, with concealed mounting, Bobrick Model B-6861. Grab bar and concealed mounting plates shall be constructed of type-304 stainless steel with satin finish (or satin finish with peened gripping surface; add .99 suffix to model number). Grab bar shall have wall thickness of 18-gauge (1.2 mm) and outside diameter of 1-1/2" (38 mm). Distance from inside of grab bar to finished wall shall be 1-1/2" (38 mm). Flanges shall be 1/8" (3-mm) thick stainless steel plate, 2” x 3-1/8" (79-mm) in diameter, and each shall have two screws holes. Flange covers shall be 11-gauge (0.8 mm) and shall snap over mounting flanges to conceal mounting screws. Grab bar shall have 90™ return to flange. Ends of grab bar shall pass through flanges and be heliarc welded to form one structural unit.
Satin-finish 18-gauge type 304 stainless steel tubing 1-1/2" (38mm) diameter.
Bar passes through flange and is heliarc welded to form single structural unit.
Cover snaps over mounting flange to conceal screws.
Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors.
Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia.
Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed.
Meets ADA Accessibility Guidelines in U.S.A.
All joints and supports are contour cut and welded.
Concealed anchors and fasteners available as an optional accessory.
Peened nonslip gripping surface available (add .99 to model number).
